Product program, Metal Coatings for the automotive component supply industry - Industrial Coatings - Performance Coatings
 
   
 
 
Metal Coatings - Product program
Metal Coatings for the automotive component supply industry
In this text:
COATINGS, solvent-based, air- and forced-drying
COATINGS, water-thinnable, air- and forced-drying
COATINGS, oven-drying
Special products
High heat resistant paints
 
 
 
Zurück
COATINGS, solvent-based, air- and forced-drying
Product-
name
Description Application
area
Colours Hardener,
Thinner
Basecoats 1K
Everpal
CF G 1032
quick drying epoxy-ester-primer with extra good corrosion protection, free of zinc-chromate, recoatable spray and dip primer for the vehicle industry, for very high requirements regarding adhesion and protection against corrosion green
brown
yellow
Thinner:
V 0003
Zinkalit
G 5521
high pigmented, quick drying epoxy-ester-zinc dust paint, recoatable primer for steel and machinery constructions grey Thinner:
V 0003
Rasantol
G 9502
very quick air- and forced drying 1K-adhesion primer on polyvinylbutyral-basis, primer for iron and non-iron metals, recoatable adhesion promoter for iron, steel, alu and coloured metal substrates.
Applicable as well as welding primer (< 20 µm dry film thickness)
redbrown
grey
black
Thinner:
V 0483
Topcoats 1K
Everpal
D 1284
quick drying synthetic resin paint with very good flow and high gloss and colour stability topcoat for vehicles and industrial installations UNI-colours Thinner:
V 0014
Hardener:
H 2080
Everpal
D 9037
quick drying weather resistant synthetic resin paint for industrial serial coating, spray and dipp application, espec. airless application for vehicles UNI-colours Thinner:
V 0208
Neopal
G 1123
quick drying 1K-one coat paint on alkyd-resin basis with excellent adhesion on different substrates one coat paint for condensers and surfaces of iron and coloured metals, as well as surfaces of mixed structures,
i. e. condensers also applicable as refinishing paint for stoving paints and ED
UNI-colours Thinner:
V 0003
Cellonit
D 9602
resin refinishing coat for brush or spray application for powder coated underground and HS-topcoat, basis polyester/melamin resin and AY-HS one coat paint white
black
other colours
on demand
synthetic resin solvents
Basecoats 2K
Evistoll
CF G 1460
2K-epoxy-primer, chromate free
mix. rate 3:1 p. weight H 1460
for steel, aluminium and zinc surfaces yellow Hardener:
H 1460
Thinner:
V0383 V0502
Rasantol
CF G 1189
very quick air- and forced drying zinc chromate free basecoat for iron and non-iron metals, universal recoatable, one and two component application possible adhesion promoter for iron, steel, alu and zinc,
also usable as welding primer (under 20µm dry film thickness)
redbrown
grau
black
Hardener:
H 1591
Thinner:
V 0502
Topcoats 2K
Stollacryl
D 1090
2K-acrylic-topcoat for highest requirements on weather and gloss stability Glanzbeständigkeit
mix. rate 2:1 p. vol H 1090
mix. rate 3:1 p. voll. H 1090 for mat coats
for high quality vehicle and industrial coating UNI-colours Thinner:
V 0196
Hardener:
H 1090
Stollacryl
D 1390
2K-acrylic -topcoat, special formulation for tuffmatt coats
mix. rate 5:1 p. weight H 1175
camouflage coatings of vehicles Military colours Hardener:
H 1175
Thinner:
V0340
Kontracid
SD 1449
2K-polyurethane-structure coat
mix. rate 5:1 p. weight H 3860
mix. rate 5:1 p. weight H 1519
mix. rate 4:1p. weight H 1042
for mechanical resistant decoration coatings UNI-colours Hardener:
H 3860
H 1519
H 4042
H 1042
Thinner:
V 0395
Kontracid
HS D 9524
2K-HS-topcoat on basis Basis OH-functional binder and tel u. aliphatical isocyanates with high content of solids
mix. rate 100:32 weight
T H 70040.1
H 1820
agricultural machinery industry, i. e. combine harvester, air- and forced drying possible UNI-colours Hardener:
H 70040.1
H 1820
Top        
COATINGS, water-thinnable, air- and forced-drying
Product
name
Description Application area Colours Hardener,
Thinner
Basecoat 1K
Stollaqua
G 1122
water-thinnable, air- and forced drying basecoat for spray and dip application with high corrosive protection properties for iron, steel, cast, aluminium and zinc surfaces after pretreatment,
for spray and dip application,
combinable with water-thinnable and solvent-based topcoats
redbrown
grey
greygreen
yellow
Thinner:
water, max. 15°dH or water deionised
Stollaqua
G 1162
water-thinnable, air-drying basecoat, very quick drying, for spray application for iron, steel, cast, aluminium and zinc surfaces after pretreatment, redbrown
black
Thinner:
water, max. 15°dH or water deionised
Aqualit
G 9521
spray-basecoat, water-thinnable, thick film primer with high corrosive protection jet-worked cast and mixed structures (metal) for vehicles and axles RAL 6006
black
Thinner:
water, max. 15°dH or water deionised
Topcoat 1K
Stollaqua
D 1208
water-thinnable, satin-glossy, quick drying topcoat, also usable as one coat paint for plastics (pretreatedt), iron, steel, cast, aluminium, after pretreatment UNI-colours Thinner:
water, max. 15°dH or water deionised
Basecoat 2K
Stollaqua
CF G 7001
2K-epoxy-basecoat
mix. rate 4,3:1 p.weight H 7101
for steel, aluminium and pretreated zinc surfaces yellow Hardener:
H 7101
Thinner:
water, max. 15°dH or water deionised
Topcoat 2K
Stollaqua
D 8000
2K-polyurethane-topcoat,
water-thinnable, for highest requirements
mix. rate 6:1 p. weight H 8000
for high quality industrial coatings UNI-colours Hardener:
H 8000
Thinner:
water, max. 15°dH or water deionised
Top        
COATINGS, oven-drying
Product
name
Description Application area Colours Hardener,
Thinner
Basecoats, solvent-based
Duplex
F 1010
stoving filler with high content of solids on alkyd-melamin basis, specially for the requirements of modern industrial coating excellent adhesion on cataphoretic primers, polished, pretreated sheet steel and aluminium grey Thinner:
V 0118
Topcoat, solvent-based
Duplex
D 1325
stoving topcoat for highest requirements regarding weather and gloss stability For industrial serial coating UNI-colours Thinner:
V 0118
Duplex HS
D 9549
HS-EB-one coat paint on polyester-melamine-resin basis
10 min 190°C
for oil filters, zinc-phosphated iron and steel surfaces white
black
Thinner:
HaKU 900
Stollacryl
D 9550
high quality stoving topcoat on acrylic-resin-basis stoving topcaot with good mechanical properties, weather resistance and retention of gloss, application i. e. for wheels metallics,
UNI-colours
 
Basecoat, water-thinnable
Stollaquid
G 1080
water-thinnable, oven-drying basecoat with low content of organic solvents, very good corrosive protection for automotive components, machinery and steel construction of iron, steel, cast and aluminium after pretreatment black
bright grey
Thinner:
water,
max. 15° dH or
water deionised
Topcoats, water-thinnable
Stollaquid
D 1213
water-thinnable, oven-drying topcoat with low content of organic solvents, high weather resistance lamps, household appliances, wheels, agricultural machinery, bicyles of iron, steel, cast and aluminium after pretreatment UNI-colours,
metallics
on demand
Thinner:
water,
max. 15° dH or
water deionised
Top        
Special products
Product
name
Description Application area Colours Hardener,
Thinner
Neopal
D 1244
strippable metal protection with high chemical and mechanincal restistance protection of metal surfaces, i. e. for transport of fitting pieces, plowshares, sprayboxes clear Thinner:
V 0003
Syntopal
G 1077
universal applicable basecoat in combination with stoving or 2K - topcoats for high quality industrial serial coating of vehicles, automotive components, bicyles etc. metallics
UNI-colours
Thinner:
V 0168
Stollacryl
HS D 9651
2K-HS-AC-one coat paint,
oven-drying on basis acrylic-resin/epoxy-resin
for oil filters, zinc-phosphate, iron, steel
mix. rate 10:3 with H 76894.4 / H 9513
black Thinner:
V 0456
Stollacryl
HS D 9576
HS-stoving clearcoat on
acrylic-melamine resin basis
15 min. 150-160°C
for coating of aluminium wheels in combination with basecoat/clearcoat; decorative UV-resistant High Solid Clearcoat clear Thinner:
V 456
Stollaquid
G 1152
basecoat, water-thinnable on polyester basis. for three layer system for automotive parts as wheels and exterior components metallics
UNI-colours
Thinner:
water deionised
Stollaquid
D 1430
stoving clearcoat, water-thinnable on synthetic resin basis for three layer system for automotive parts as wheels and exterior components clear Thinner:
water deionised
Evistoll
G 1082
stoving dipping primer on epoxy basis, excellent adhesion, chemical resistance and corrosive Korrosions,
15 min 170 °C
for the coating of parts with high requirements, i. e. reflectors, fuel canisters clear
redbrown
black
Thinner:
V 0111
V 0165
Polystoll
D 1083
stoving topcoat on polyester-basis good resistance against weather and chemicals
20 - 30 min 150 °C
for zinc surfaces and coloured metals, also usable as one coat paint, automotive components, machinery, etc. UNI-colours Thinner:
V 0123
Chemophan
D 9520
plastic dispersion on PVF basis with highest requirements on corrosion protection coating of fuel and brake lines
substrate: zinc tube
application: flowing
grey-oliv
clear
 
Aquidol
D 9566
strippable, water-thinnable paint coating of temporary limited applications in the industrial area. white Thinner:
water
         
Top        
High heat resistant paints
Product
name
Description Application area Colours Hardener,
Thinner
Solvent-based, air-drying
Chemolit
D 9560

AS-Lack
silicon-resin paint, high heat resistant, permanent exposure up to 650°C, mat gloss ,initial drying at room temperature, 140°C possible for exhausts, chimneys and ovens silvergrey
anthrazitgrey
blackgrey
Thinner:
V 0441
Chemolit
D 9561

AS-Lack
silicon-resin paint, high heat resistant, permanent exposure up to 450°C, initial drying at room temperature, 160°C possible for exhausts, chimneys and ovens black
redish
Thinner:
V 0441
Chemolit
D 9695

AS-Lack
silicon-resin paint, heat resistant up to 200°C, initial drying at room temperature, 120°C possible as one coat paint up to 250°C. black
matt
 
Solvent-based, oven-drying
Chemolit
D 1281
silicon resin paint, high heat resistant one coat paint up to 600°C permanent exposure for exhausts, industrial ovens, waste pipes of iron and steel black
alu
Thinner:
V 0003
Chemolit
D 9564

AS-Lack
silicon resin paint heat resistant up to 500-550°C,
drying at 160°C, available in silk-glossy and fuel resistant formulation
for exhausts, industrial ovens, waste pipes of iron and steel black
galenitgrey
Thinner:
V 0441
Chemolit
D 9702

AS-Lack
Silicon resin paint heat resistant up to 500-550°C,
drying at 80 °C, available in silk-glossy and fuel resistant formulation
for exhausts, industrial ovens, waste pipes of iron and steel black
galenitgrey
Thinner:
V 0441
Water-thinnable, oven-drying
Stollaquid
D 1056
water-thinnable, heat resistant stoving exhaust paint for permanent exposure up to 600°C. for exhausts, industrial ovens, waste pipes of iron and steel. silver
black
Thinner:
water max
15° dH or water deionised
         
Should you require any further information, please do not hesitate to contact us.

Christoph Mölzer
Performance Coatings Austria GmbH

Metal Coatings - Marketing Center

Anschrift: Mödlinger Straße 15
Postfach 75
A-2353 Guntramsdorf

Telefon: + 43 (0)2236 500 440
Fax: + 43 (0) 2236 500 404
Email: Cmoelzer@Herberts.at


Last update March 2001
 
  Top